Mindray BeneVision N15 Service Manual

1-2 BeneVision N17/BeneVision N15/BeneVision N12 Patient Monitor Service Manual
1.1.2 Warnings
WARNING
 All installation operations, expansions, changes, modifications and repairs of this product
should be conducted by Mindray authorized personnel.
 There is high voltage inside the equipment. Never disassemble the equipment before it is
disconnected from the AC power source.
 When you disassemble/reassemble a parameter module, a patient leakage current test must
be performed before it is used again for monitoring.
 The equipment must be connected to a properly installed power outlet with protective earth
contacts only. If the installation does not provide for a protective earth conductor, disconnect
it from the power line and operate it on battery power, if possible.
 Dispose of the package material, observing the applicable waste control regulations and
keeping it out of children’s reach.
1.1.3 Cautions
CAUTION
 Make sure that no electromagnetic radiation interferes with the performance of the
equipment when preparing to carry out performance tests. Mobile phone, X-ray equipment
or MRI devices are a possible source of interference as they may emit higher levels of
electromagnetic radiation.
 Before connecting the equipment to the power line, verify the voltage and frequency ratings
of the power line are the same as those indicated on the equipment’s label or in this manual.
 Protect the equipment from damage caused by drop, impact, strong vibration or other
mechanical force during servicing.
1.1.4 Notes
NOTE
 Refer to Operation Manual for detailed operation and other information.
1.2 Equipment Symbols
See the N series Operator’s Manual (P/N: 046-011259-00) for information about the symbols used on this
product and its packaging.

Mindray BeneVision N15 Specifications

General

Brand	Mindray
Model	BeneVision N15
Category	Medical Equipment
Language	English