Mindray BeneVision N15 Service Manual

BeneVision N17/BeneVision N15/BeneVision N12 Patient Monitor Service Manual 4-9
4.6.9 Recorder Failures
Failure Description Possible Cause Troubleshooting
No printout
Recorder module
disabled
Verify the recorder status LED is lit.
If it is lit, recover its function in "Factory
Maintenance".
Printing paper jam Reinstall the paper roll properly.
Cable defective or
improperly connected
 Verify the cable connecting the recorder and
the main control board is properly
connected.

Verify the connecting cables and connectors
are not damaged.
Recorder failure Replace the recorder.
Main control board
failure
Replace the main control board.
Poor printing effect
Printing paper thermal
coating failure
Replace the printing paper.
Thermal head dirty Clean the thermal head.
Recorder failure Replace the recorder.

Mindray BeneVision N15 Specifications

General

Brand	Mindray
Model	BeneVision N15
Category	Medical Equipment
Language	English