Features and controls
3-259
3
Volume up button
Press this button to increase the volume.
Volume down button
Press this button to decrease the volume.
SPEECH button
● Press this button to change to voice recognition mode.
While the system is in voice recognition mode, “Listen-
ing” will appear on the audio display.
● If you press the button briefly while in voice recognition
mode, it will interrupt prompting and allow voice com-
mand input.
Pressing the button longer will deactivate the voice recog-
nition mode.
● Pressing this button briefly during a call will enable voice
recognition and allow voice command input.
PICK-UP button
● Press this button when an incoming call is received to
answer the telephone.
● When another call is received during a call, press this but-
ton to put the first caller on hold and talk to the new caller.
• In such circumstances, you can press the button briefly
to switch between callers. You will switch to the first
caller and the other caller will be put on hold.
• To establish a three-way call in such situations, press the
SPEECH button to enter voice recognition mode and
then say “Join calls.”
HANG-UP button
● Press this button when an incoming call is received to
refuse the call.
● Press this button during a call to end the current call.
When another call is on hold, you will switch to that call.
● If this button is pressed in the voice recognition mode, the
voice recognition mode will be deactivated.
OTE
● When you press the SPEECH button to enter voice recog-
nition mode with a cellular phone paired to the system,
current information on the cellular phone, such as
“remaining battery life,” “signal strength” or “roaming,”
will be displayed on the audio display.*
*: Some cellular phones will not send this information to
the Bluetooth
®
2.0 interface.
● Call waiting and three-way calls can be used by the
Bluetooth
®
2.0 interface, only if it is possible to use those
services with your cellular phone.
BK0138600US.book 259 ページ 2011年7月17日 日曜日 午後2時32分