To Next Page

To Previous Page

5-70

Comfort controls

OTE

● The default factory setting for the code is “1111.”

● You can change the code to any number you want with the

“CODE EDIT” function.

● To cancel a code entry, turn the TUNE/SOUND switch (7)

while the code entry window is displayed.

The code entry will be cancelled and then the setting

menu will be switched.

To change the lock cancellation code

You can change the code for unlocking channel(s) to any num-

ber you want.

1. Press the TUNE/SOUND switch (7) for about 2 seconds

or longer to enter the MENU mode. Then select the

LOCK setting mode.

2. In the LOCK setting mode, turn the TUNE/SOUND

switch (7) and select “CODE EDIT.”

3. When you press the TUNE/SOUND switch (7), the code

entry window will be shown in the display.

4. Use the memory select buttons (10) to enter the current

code and then press the TUNE/SOUND switch (7).

5. If the correct code is entered, the code entry window will

be shown again. Enter your desired code.

If the entered code is incorrect, a warning sound will be

emitted and “CODE ERROR” will be displayed. The code

entry window will then be shown again.

You can try to enter the code again, no matter how many

times an incorrect code has been entered.

6. After you enter the new code, press the TUNE/SOUND

switch (7). The code entry window will be shown again

for confirmation. Enter the new code again and press the

TUNE/SOUND switch (7).

BK0102103US.book 70 ページ２００９年１０月２６日　月曜日　午後１時３８分

Mitsubishi LANCER User Manual

Other manuals for Mitsubishi LANCER