2.24.8.2
Digital Options
One or more of the following options may be preprogrammed in your radio. Check with your dealer or
system administrator for more information.
Option Result
Digital Carrier-Operated Squelch You hear all digital traffic.
Normal Squelch You hear any digital traffic having the correct
network access code.
Selective Switch You hear any digital traffic having the correct
network access code and correct talkgroup.
2.24.9
Using the PL Defeat Feature
This feature allows you to override any coded squelch that preprogrammed to a channel. The radio
also unmutes to any digital activity on a digital channel. When this feature is active, the Carrier Squelch
status indicator is displayed.
Procedure:
Place the preprogrammed PL Defeat switch in the PL Defeat position.
One of the following occurs:
• The radio plays the active transmission on the channel.
• The radio is muted if no activity is present.
2.24.10
Digital PTT ID Support
This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving
a transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the
receiving radio and the dispatcher.
The ID number of your radio is also automatically sent every time the PTT button is pressed. This is a
per-channel feature. For digital voice transmissions, the ID of your radio is sent continuously during the
voice message.
2.24.11
Smart PTT (Conventional Only)
Smart PTT is a per-personality, programmable feature used to keep radio users from talking over other
radio conversations. When Smart PTT is enabled in your radio, you cannot transmit on an active
channel.
The following table shows the variations of Smart PTT.
Mode Description
Transmit Inhibit on Busy Channel with Carrier You cannot transmit if traffic is detected on the
channel.
6875946M01-JK
Advanced Features
117
To Next Page
Loading...
Need help?
General