2 Perform one of the following actions and proceed to the next step:
• Press the Menu Select button directly below Ok.
• Enter the password and press the Menu Select button directly below Ok.
If the password is not entered, the radio displays the non-password protected zones only.
3 Press or to select Zn/Ch.
4 Press or to select the required zone.
5 Press or to select the required channel.
The display shows the radio parameter screen.
6 Press or to select the required parameter to edit.
2.24.16.1.2
Non-Federal
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press
or to select Zn/Ch.
4 Press or to select the required zone.
5 Press
or to select the required channel.
The display shows the radio parameter screen.
6 Press or to select the required parameter to edit.
2.24.16.2
Editing FPP Mode Parameters
Perform the following actions as required while navigating through the feature parameters.
• Press
• Press the Menu Select button directly below Edit to edit the parameter values.
• Press the Back button to return to the previous screen.
6875946M01-JK
Advanced Features
125
To Next Page
Loading...
Need help?
General