6878215A01
2-32 Standard Configurations Radio Mounting
2.2.3 Locking Kit (Optional)
2.2.3.1 All Radios Except 100W
If an optional locking kit (HLN6372_) is used (shown in Figure 2-39), position the lock housing on the
trunnion after installing the radio mounting screws. Then rotate the lock with the key in it and remove
the key to lock the radio. You can install the lock on either side of the radio, and in dash and remote
mount installations.
Figure 2-39. Locking Kit (Optional) (Cannot Be Used for 100W Radios)
2.2.3.2 100W Radios
An integral lock is included with all 100W radios. The use of a key is only required to unlock the radio
(see Figure 2-40).
Figure 2-40. Lock Supplied with 100W Quick Release Trunnion
Lock
Lock
Housing
Existing
Mounting
Screw