6878215A01
2-36 Standard Configurations Power Cables (Transceiver and Control Head)
2.3.2 O2, O3, O5, O7 or O9 Control Head Power Cables
Figure 2-46. HKN6188_ Power Cable with External Speaker Connector
Figure 2-47. HKN6187_ Power Cable with External Speaker Connector, Record
Audio Output Jack (2.5 mm) and Earphone Jack (2.5 mm)
NOTE: Audio Out – Does not require CPS programming. Attaching a headset will mute the external
speakers of the radio which are attached at the SPK jack of the control head.
Record Out – Requires CPS programming. In CPS, navigate to Radio Wide/Advanced/
Record Audio and select TX + RX Audio.