2 OVERVIEW
9
Invalid CableCARD Security Certificate
In the event that the CableCARD provides an invalid security certificate to the DCH
receiver, all access to live, recorded, and on-demand television programming will be
terminated. The DCH6416 receiver will be unable to provide access to television
programming until a CableCARD that can provide a valid security certificate is
inserted. When a CableCARD with an invalid security certificate is inserted into the
DCH6416, the following on-screen alert banner will be shown:
Invalid CableCARD—DCH6416 Pairing
Your cable operator must validate all pairings between the CableCARD and the DCH
receiver. This process is performed by the cable operator. However, if the pairing
between the CableCARD and the DCH6416 receiver cannot be validated or has not
yet been validated during a new installation, the following on-screen alert banner will
be shown (actual values shown will differ):
CableCARD Certificate Invalid
CableCard™ Pairing
In order to start cable service
for this device, please contact
your cable provider.
x-xxx-xxx-xxxx
CableCARD ID 000-298-997-225-8
Host ID 004-000-000-497-6
Data 302-722-504-62
Unit Address 000-02989-97225-100
eCM WAC --:--:--:--:--:--
Host Reports 1-Way RF only
REFRESH
To Next Page
Loading...
Need help?
General
