4 DIAGNOSTICS
53
User Setting Status
This diagnostic displays the user settings. The format may vary. The information on
the OSD and front panel is updated when you display the diagnostic.
The User Setting Status fields are:
Setting Description
TV Type Allows you to specify the style of television connected to the DCH receiver. Options
include 16:9, 4:3 LETTERBOX, and 4:3 PAN SCAN. The 16:9 option is the default
selection. The options are used as follows:
• 16:9 designates that a widescreen television is connected to the DCH
receiver.
• 4:3 LETTERBOX designates that a standard screen television is connected
to the DCH receiver and that widescreen programs should be scaled to fit the
screen with black bars above and below the picture.
• 4:3 PAN SCAN designates that a standard screen television is connected to
the DCH receiver and that widescreen programs should be cropped so that
the picture fills the entire screen.
HDMI/YPbPr
Output
Allows you to specify the video output format of the DCH receiver for all content (when
the 4:3 override setting is Off) or for all 480p, 720p, and 1080i content (when the 4:3
override is used). Options include 1080i, 720p, 480p, and 480i. By default, the 1080i
option is selected. The options are used as follows:
• 1080i—The DCH receiver will present programs in the High Definition 1080i
format (1920 x 1080 pixels).
• 720p—The DCH receiver will present programs in the High Definition 720p
format (1280 x 720 pixels).
• 480p—The DCH receiver will present programs in the Enhanced Definition
480p format (720 x 480 pixels).
• 480i—The DCH receiver will present programs in the Standard Definition
480i format (720 x 480 pixels).
Some televisions many only support certain video formats. Please consult your
television’s user manual for more information on format compatibility.
The DCH receiver can detect when the HDMI connection is in use. If you are not
using the HDMI connection on the DCH receiver, the HDMI/YPbPr Output setting will
display as YPbPr Output in the User Settings Menu.
To Next Page
Loading...
Need help?
General
