4 DIAGNOSTICS
36
Separable Security
This diagnostic displays information on the CableCARD and CableCard Interface
with the DCH.
Field Description
CARD Interface CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate ‘Good’ if no errors were detected, ‘Error’ if
there is a problem detected with establishing the CableCARD interface, or
‘Unsupported CARD’ if the inserted CableCARD is not an M-Card.
CableCARD ID The unique identifier provided by the CableCARD.
Host ID The unique identifier in the Host Device Certificate.
Data ID A value generated by the CableCARD for the Pairing report.
Validation
• UKNOWN if a Validation message was not received by the product.
• VALID or INVALID as set by the Host Validation Message received
from the headend.
• BINDING if the CableCARD is busy with the binding authentication
process.
• NOT BOUND if Card validation status in not bound for CableCARD
reasons.
• HOST CERTIFICATE INVALID if the status is not bound because
the Host Certificate was invalid.
• HOST SIGN FAILED if status is not bound because of failure to
verify Host’s SIGN.
• AUTH KEY FAILED if status in not bound because of failure to
match AuthKey from the Host Device.
• FAILED if binding failed for other reasons.
Pairing Rpt Method Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or
set to ‘Unknown’ if the headend message was not received.
MSO Phone Number MSO Phone Number as configured at the headend.
CableCARD
To Next Page
Loading...
Need help?
General
