3 INSTALLATION
14
Cabling to an HDTV for Video
For the best possible HDTV video quality:
• If the TV has an HDMI input, connect it to the DCH6416 HDMI output. If the TV
has a DVI input, you can connect it to the DCH6416 HDMI output using and
HDMI-to-DVI converter cable or adapter.
• If the TV has neither an HDMI nor a DVI input but has an IEEE-1394 input,
connect it to the DCH6416 IEEE-1394 output. If you use IEEE-1394, on-screen
graphics do not display.
• Otherwise, use the component video (Y, Pb, and Pr) connectors.
Note: Be sure to match up each signal to the same connection on the TV.
Otherwise, the colors will not appear correctly on your TV.
Figure 3-1 Cabling to an HDTV
Because HDMI and IEEE-1394
provide both video and audio
output, no additional audio
connections to the TV are required
if you use either of these
connections.
To Next Page
Loading...
Need help?
General
