Contacts
Section 2E. Contacts 101
䡲 Enter the new Speed Dial number using the
keypad.
䡲 When you are finished, press r.
8. If you want to create a voice name for a phone
number, select
Voice Name. As directed by the
screen prompts, record the name you want to
assign to the number. Speak clearly into the
microphone.
9. When you are finished, press Back (right softkey).
10. If you want to add more numbers or addresses to
the entry:
䡲 Scroll past the information you already entered.
䡲 Enter the additional information for the entry using
step 2 through step 6. You must assign a name to
the entry, if you have not already.
11. Press Save (left softkey).
Creating Pauses and Waits
When storing a number, you can program your phone
to pause or wait between digits while dialing. A pause
makes your phone pause for three seconds before
dialing further. A wait makes your phone wait for your
response before dialing further.
This feature is useful when using voicemail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
For details on using pauses and waits, see “Dialing
and Saving Phone Numbers With Pauses” on page 33.
Storing Numbers Faster
To store numbers to Contacts from standby mode:
1. Use the keypad to enter the number you want to
store.
2. Press M and then select Store Number.
3. To store the number as a new entry, select
[New Contact].
– or –
To store the number to an existing entry, select the
entry.
4. With the Contacts type field highlighted, scroll left
or right to display the Contacts type you want to
assign the number.
To Next Page
Loading...
Need help?
General
