54 Section 2A. Making and Answering Calls
Using the Call Alert Queue
When you queue a Call Alert, it remains in the Call Alert
queue until you make a Direct Connect call to the
sender or delete it.
Viewing Call Alerts
1. Press M > Call Alert.
2. Scroll through the list.
Viewing Date and Time
To view the date and time a Call Alert was received:
1. Press M > Call Alert.
2. Select the Call Alert you want information on and
press r.
Responding to Call Alerts in the Queue
After you queue a Call Alert, you can respond to it by
making a Direct Connect call to the sender or sending
a Call Alert to the sender.
To make a Direct Connect call to the sender:
1. Press M > Call Alert.
2. Scroll to the Call Alert you want to respond to.
3. Press the Direct Connect button to begin the call.
This removes the Call Alert from the queue.
To send a Call Alert to the sender:
1. Press M > Call Alert.
2. Scroll to the Call Alert you want to respond to.
3. Press Alert (left softkey). Ready to Alert appears on
the display.
4. Press the Direct Connect button until Alert
Successful
appears on the display.
To Next Page
Loading...
Need help?
General
