Contacts
Section 2E. Contacts 105
4. Enter an available speed dial number and
press r.
5. Press Back (right softkey) to return to the Contacts
menu and then press
Save (left softkey) to save the
changes.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ring Tones”
on page 65.)
1. Press M > Contacts and then scroll to an entry.
2. Press Edit (left softkey) or press M > Edit to display
the Edit Entry menu.
3. Select Ringer and press r to display the Ring
Tones menu.
4. Scroll through available ringers. (When you
highlight a ringer type, a sample ringer will sound.)
5. Select a ringer and press r.
6. Press Done (left softkey) to save the new ringer
type.
Checking Capacity
To see how many numbers are stored in Contacts:
1. Press M > Contacts > M.
2. Select Capacity.
Dialing Nextel Customer Service
Your Contacts list is preprogrammed with contact
numbers for Nextel Customer Service.
To dial Nextel Customer Service from your Contacts:
1. Press M > Contacts and scroll to NEXTEL CARE.
2. Press N to place the call.
Note
If you attempt to assign an already in-use speed dial
location to a new phone number, a message will
appear asking if you wish to replace the existing
speed dial assignment. Press Yes (left softkey) to
assign the location to the new phone number and
delete the previous speed dial assignment.
To Next Page
Loading...
Need help?
General
