40 Section 2A. Making and Answering Calls
Group Connect Call With a Direct Connect
Number” on page 41.
2. Press the Direct Connect button.
Answering Group Connect Calls
䊳 Proceed as if answering a Direct Connect call from
one user. Only one person at a time may speak on
a Group Connect call.
Creating Groups in Contacts
1. Press M > Contacts.
2. Select [New Group].
3. If you want to assign a name to the Group, enter
the name.
4. Add Group members. See “Adding Group
Members” on page 40.
5. If you want to create a voice name for the Group,
select
[Options] > Voice Name. As directed by the
screen prompts, say and repeat the voice name
you want to assign to the Group. Speak clearly into
the microphone. When you have finished, press
Back (right softkey).
6. Press Save (left softkey).
Adding Group Members
You can add Group members that have a Direct
Connect number and Group Connect-compatible
phone to your Group by selecting them from Contacts,
the Recent Calls list, Memo, or by manually entering
the Direct Connect number from your keypad. You can
also add all members in an existing Group to another
Group by selecting the Group name from Contacts.
To add Group members from Contacts, the Recent Calls
list, or Memo:
1. While creating a Group, select [Add Member].
– or –
Select
[Add Number] and press Browse (left softkey).
Note
If you do not assign a name, the Group is named
“Group” followed by the number of members in the
Group. For example, “Group (8)” for a group with
eight members.
To Next Page
Loading...
Need help?
General
