78 Section 2B. Settings
3.
Select Store Changes.
Creating Profiles
1. Press M > Profiles.
2. Select [New Profile].
– or –
Scroll to any profile, press M, and then select
New.
3. Enter the name you want to give the profile, and
then press r.
4. If you want to base this profile on an existing
profile, select
Copy From and then select the profile
you want to base this profile on. If you do not
choose a profile to copy from, the new profile is
based on a default profile.
5. Press Create (left softkey).
6. Scroll through the list of options and set their
values.
7. When you are finished, press Done (right softkey).
Editing Profiles
1. Press M > Profiles.
2. Scroll to the profile you want to edit.
3. Press M and then select Edit.
4. Scroll through the list of options and set their
values.
5. When you are finished, press Done (right softkey).
Deleting Profiles
To delete a profile:
1. Press M > Profiles.
2. Scroll to the profile you want to delete.
3. Press M and then select Delete.
4. Press r or press Yes (left softkey).
To delete all profiles:
1. Press M > Profiles.
2. Press M and then select Delete All.
Note
The temporary profile is stored with the name of the
profile it is based on. The profile it is based on, as it
existed before you made changes to settings, is
gone.
To Next Page
Loading...
Need help?
General
