Using the MC45 2 - 23
Taking Photos
To take a photo:
1. Press the side Camera button or tap Start > Pictures & Videos and then tap Camera on the Command bar.
2. Check the image on the view finder, adjust if necessary.
3. Press the side Camera button or the ENTER key to take the picture. Hold the MC45 still until the camera flash
occurs or the shutter sound is heard.
Recording Video
To record a video clip:
1. Press the side Camera button or tap Start > Pictures & Videos and then tap Camera on the Command bar.
2. Tap Camera on the command bar.
3. Tap Menu > Video to set shooting mode to video.
The available recording time displays on the screen.
4. Press the OK key or the side Camera Button to begin recording.
Recording stops when you press the OK key or the side Camera Button again.
Viewing Photos and Videos
To view photos and video clips:
1. Tap Start > Pictures & Videos icon.
2. Tap the picture or video clip to view.
NOTE By default, the time limit for recording videos is set to 30 seconds.
To Next Page
Loading...
Need help?
General
