NEC MultiSync XG110LC User Manual

102
SETTING
PJ Address Display Setting
This feature allows you to view the PJ address on the screen.
To set the PJ address display, proceed as follows:
1 Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 59 for the explanation of PASSCODE.
2 Use the CURSOR or button to highlight the “8/OPTION”
line. Press ENTER to display the “OPTION” menu. You can also
select the “OPTION” menu directly by pressing the INPUT “8”
button.
3 Use the CURSOR or button to highlight the “2/MENU
MODE” line. Press ENTER to display the “MENU MODE”
menu. You can also select the “MENU MODE” menu directly by
pressing the INPUT “2” button.
4 Use the CURSOR or button to highlight the “NEW
SIGNAL MESSAGE” item. Press ENTER to display the “PJ
ADDRESS DISPLAY” menu.
5 Use the CURSOR or button to select either “OFF” or
“ON”, and press ENTER.
Items to select
•OFF ........... Does not display PJ address
•ON ............ Displays PJ address
6 To end this mode, press END.
• Whenever the END button is pressed, the menu will sequence in
this order.
“OPTION” menu→”ADJUST” menu→Source screen.
• If the “RETURN USER MODE?” menu appears, use the
CURSOR or button to select either “YES” or “NO” and
then press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode again,
you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode again,
you will not need to re-enter your passcode.
– ADJUST –
1 / SIGNAL ENTRY
2 / FOCUS
3 / ALIGNMENT
4 / CONVERGENCE
5 / KELVIN
6 / R,G,B GAIN
7 / PASSCODE
8 / OPTION
9 / REF.ADJUST
– OPTION –
1 / SETTING MODE
2 / MENU MODE
3 / SEQUENCER
4 / PJ ADDRESS
5 / VERSION
6 / HOUR METER
7 / DEFAULT DATA
OPTION - MENU MODE -
MESSAGE MODE
MESSAGE COLOR
DATE : MM/DD/YY
TIME : 24HOUR
AUTO
COLOR
DATE : ON
DAY : OFF
TIME : ON
10 SEC
OFF
DATE, TIME DISPLAY
DATE, TIME PRESET
PJ ADDRESS DISPLAY
NEW SIGNAL MESSAGE
ON
PJ ADDRESS DISPLAY
OFF
ON
RETURN USER MODE?
YES NO

NEC MultiSync XG110LC Specifications

General

Brand	NEC
Model	MultiSync XG110LC
Category	Monitor
Language	English