NEC MultiSync XG110LC User Manual

98
SETTING
Date, Time Display Setting
The current year, month, date and time are displayed on the top of
the screen.
Proceed as follows:
1 Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 59 for the explanation of the PASSCODE.
2 Use the CURSOR or button to highlight the “8/OPTION”
line. Press ENTER to display the “OPTION” menu. You can also
select the “OPTION” menu directly by pressing the INPUT “8”
button.
3 Use the CURSOR or button to highlight the “2/MENU
MODE” line. Press ENTER to display the “MENU MODE”
menu. You can also select the “MENU MODE” menu directly by
pressing the INPUT “2” button.
4 Use the CURSOR or button to highlight the “DATE, TIME,
DISPLAY” item. Press ENTER to display the “DATE, TIME
DISPLAY” menu.
5 Use the CURSOR or button to select any one of the three
items: DATE, DAY, and TIME. Then press ENTER.
– ADJUST –
1 / SIGNAL ENTRY
2 / FOCUS
3 / ALIGNMENT
4 / CONVERGENCE
5 / KELVIN
6 / R,G,B GAIN
7 / PASSCODE
8 / OPTION
9 / REF.ADJUST
DATE
DAY
TIME
DATE,TIME DISPLAY
ON
OFF
ON
– OPTION –
1 / SETTING MODE
2 / MENU MODE
3 / SEQUENCER
4 / PJ ADDRESS
5 / VERSION
6 / HOUR METER
7 / DEFAULT DATA
OPTION - MENU MODE -
MESSAGE MODE
MESSAGE COLOR
DATE, TIME PRESET
DATE : MM/DD/YY
TIME : 24HOUR
AUTO
COLOR
DATE : ON
DAY : OFF
TIME : ON
10 SEC
PJ ADDRESS DISPLAY
OFF
DATE, TIME DISPLAY
NEW SIGNAL MESSAGE
ON

NEC MultiSync XG110LC Specifications

General

Brand	NEC
Model	MultiSync XG110LC
Category	Monitor
Language	English