117
Checking and Setting the Running Time
The projector will give you the amount of operating time.
Proceed as follows:
1 Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 59 for the explanation of the PASSCODE.
2 Use the CURSOR or button to highlight the “8/OPTION”
line. Press ENTER to display the “OPTION” menu. You can also
select the “HOUR METER” screen directly by pressing the
INPUT “8” button.
3 Use the CURSOR or button to highlight the “6/HOUR
METER” line. Press ENTER to display the “HOUR METER”
screen. You can also select the “HOUR METER” screen directly
by pressing the INPUT “6” button.
Items to select
• PJ RUNNING TIME
The amount of operating time of the projector.
• CRT RUNNING TIME
The amount of operating time of CRT.
• USER PJ RUNNING TIME
The amount of operating time of the projector. User resetable.
How to reset the user projector or CRT running time:
1) Use the CURSOR buttons to select the item and then press
ENTER.
• The “USER PJ RUNNING TIME RESET?” or “USER
CRT RUNNING TIME RESET?” menu is displayed.
2) Use the CURSOR or button to select either “YES” or
“NO” and then press ENTER.
Items to select
• YES ......... The time will be reset
• NO ........... The time will not be reset
• The display will be returned to the “HOUR METER” screen.
USER PJ RUNNING TIME RESET?
YES NO
HOUR METER
PJ RUNNING TIME
CRT RUNNING TIME
USER PJ RUNNING TIME
∗∗∗∗ ∗∗
HM
∗∗∗∗
∗∗
H
M
R
∗∗∗∗
∗∗
H
M
G
∗∗∗∗
∗∗
H
M
B
∗∗∗∗
∗∗
M
H
– ADJUST –
1 / SIGNAL ENTRY
2 / FOCUS
3 / ALIGNMENT
4 / CONVERGENCE
5 / KELVIN
6 / R,G,B GAIN
7 / PASSCODE
8 / OPTION
9 / REF.ADJUST
– OPTION –
1 / SETTING MODE
2 / MENU MODE
3 / SEQUENCER
4 / PJ ADDRESS
5 / VERSION
6 / HOUR METER
7 / DEFAULT DATA
SETTING
To Next Page
Loading...
Need help?
General