Configure Switching
122
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the MSTP Status information that is displayed.
Configure CST Port Settings
Use the CST Port Configuration page to configure Common Spanning Tree (CST) and
Internal Spanning Tree on a specific port on the switch.
 To configure CST port settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > STP > Advanced > CST Port Configuration.
Table 25. STP advanced CST configuration, MSTP status
Field Description
MST ID The ID of the MST instance (including the CST).
VID The VLAN IDs that are associated with the MST ID.
FID The filtering identifiers (FIDs) that are associated with the MST ID.
To Next Page
Loading...
Need help?
General