Configure Switching
147
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Configure the Global MLD Snooping Settings
You can enable MLD snooping globally.
 To enable MLD snooping globally:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switchingï€ > Multicast > MLD Snooping > Configuration.
6. Select the MLD Snooping Admin Mode Enable radio button.
By default, the Disable radio button is selected.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The VLAN IDs Enabled For MLD Snooping section displays the VLAN IDs, if any, for
which MLD snooping is enabled.
To Next Page
Loading...
Need help?
General