Monitor the System
325
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Delete the Settings for a Remote Syslog Host
 To delete the settings for a remote syslog host:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Logs > Server Log.
The Server Configuration page displays.
6. Select the check box that is associated with the host.
7. Click the Delete button.
The host is removed.
View the Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
The information can be retrieved as a file.
The page also displays information about the traps that were sent.
 View the trap logs and clear the counters:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
To Next Page
Loading...
Need help?
General