NETGEAR ProSafe XS748T User Manual

Manage Device Security
264
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Port Security Configuration.
The Port Security Configuration page displays.
6. Make sure that port security is globally enabled.
For more information, see Configure 802.1X Settings for a Port on page 255.
7. Select Security > Traffic Control > Port Security > Interface Configuration.
The Interface Configuration page displays.
8. Make sure that port security is enabled for the individual interface for which you want to view
the dynamically learned MAC addresses.
For more information, see Configure a Port Security Interface on page 262.
9. Select Security > Traffic Control > Port Security > Security MAC Address.
10. From the Port List menu, select the individual interface.
The Dynamic MAC Address Table displays the MAC addresses and their associated
VLANs that were learned on the selected port.
11. To convert the dynamically learned MAC address to a statically locked addresses, select the
Convert Dynamic Address to Static check box.
12. Click the Apply button.
The dynamic MAC address entries are converted to static MAC address entries in a
numerically ascending order until the static limit is reached.
Field Description
VLAN ID The VLAN ID corresponding to the MAC address.
MAC Address The MAC addresses learned on a specific port.

NETGEAR ProSafe XS748T Specifications

General

Brand	NETGEAR
Model	ProSafe XS748T
Category	Switch
Language	English