6 - FORM NO. 56043107 - Advolution
™
2710
/ UHR 70-1700
TECHNICAL SPECIFICATIONS
General Specifi cations English (Metric)
Burnishing Pad Diameter 27 inches (68.58 cm)
Machine Length 65.5 inches (166.37 cm)
Machine Width 32 inches (81.28 cm)
Machine Height 54 inches (137.16 cm)
Machine Weight
484 lbs. (219.53 kg) net w/o batteries
1,379 lbs. (626 kg) gross w/six 395 AH batteries
Front Wheel Weight (w/six 395 AH batteries) 308 lbs. (139.7 kg)
Rear Right Wheel Weight (w/six 395 AH batteries) 445 lbs. (201.8 kg)
Rear Left Wheel Weight (w/six 395 AH batteries) 451 lbs. (204.5 kg)
Front Wheel Pressure (w/six 395 AH batteries) 128 PSI
Rear Right Wheel Pressure (w/six 395 AH batteries) 72 PSI
Rear Left Wheel Pressure (w/six 395 AH batteries) 105 PSI
Average Coverage Rate 41,580 sq. ft (3,862m
2
) per hour
Average Run Time 3 hours per battery charge
Batteries Recommended Six 6 volt, 395 A/H @ 20 hour rate,
120 lbs. (54.4 kg) each
Battery Compartment Size
25 inches (63.50 cm) long
22.5 inches (57.15 cm) wide
17.50 inches (44.45 cm) high
Battery Charger Recommendation 25 or 36 Amp output, 36 volt charger
Burnisher Pad Motor 36 volt, 3.25 hp, 85 Amp
Wheel Drive Motor 36 volt, 1 hp, 27 Amp
Pad Lift Motor 36 volt, 1/6 hp, 6.7 Amp
Drive System Speed Control Electronic, fully variable Fwd/Rev
Max Transport Speed 396 FT/min
Max Burnish Speed 308 FT/min
Turning Radius 72 inches (182.88 cm)
Wheels
9.75 inch (24.76 cm) drive wheel
12 inch (30.48 cm) rear wheels
Ramp Climbing Ability 12.3% grade
Sound Pressure Level (IEC 60704-1) 69 dB(A)/20μPa (at operator’s ear)
To Next Page
Loading...
Need help?
General
