To Next Page

To Previous Page

Emergency Operation

AFP-2800/2802 Manual – P/N 11249 11-Mar-08 5

1 EMERGENCY OPERATION

Isolate Bells

Press: EXT BELL ISOLATE

 EXT BELL ISOLATE LED will light

 The Bells & Buzzer will stop

 A subsequent alarm will restart the Buzzer but not the bells

 The bell isolate can be toggled by pressing the button a second time

Isolate Warning System

Press: WARN SYS ISOLATE

 WARN SYS ISOLATE LED will light

 The warning system will stop

 A subsequent alarm will restart the Buzzer but not the warning

system

 The warning system isolate can by toggled by pressing the button a

second time

Acknowledging an Alarm

Select the Alarm using the PREV , NEXT buttons

Press: ACK to acknowledge

 This will individually acknowledge alarms

 Once all alarms are acknowledged the alarm LED will go steady

Resetting an Alarm

Select the Alarm using the PREV , NEXT buttons

Press: RESET then press ACK to confirm the resetting

 This will individually acknowledge and reset alarms

 Resets zone in alarm and clears all alarm inputs in the zone

 If alarm is still present, the zone(s) will either stay in alarm or re-

alarm again after about 15 seconds

Isolate an Alarm

Select the Alarm using the PREV , NEXT buttons

Press: ISOL then press ACK to confirm the isolation

 Isolates the point or zone in alarm and clears it’s alarm outputs

 Isolating a zone automatically acknowledges and isolates all points

in the zone

Notifier AFP-2800 User Manual

Other manuals for Notifier AFP-2800