Oki B410 User Manual

43984801TH Rev.1
24 /
Oki Data CONFIDENTIAL
2. Operational explanation
2.2 Printing process
The paper fed from Tray 1 and Tray 2 is conveyed by feeding roller, conveying roller, and resist roller.
When feeding paper is from MPT, it is conveyed by MPT, feeding roller, and resist roller. After that the
feeding paper that is conveyed by image drum and the nip part of transfer roller forms toner image
on the paper through electrophotographic process. And then, the toner on the paper is fused by the
heat and pressure as the fuser unit passing through. The paper that fused the toner image is ejected
from the face down stacker of the ejecting roller. In the case of face up ejecting, it needs to open
the backside cover and install face up stacker. (It is unavailable for duplex printing while it is face up
ejecting.)
The above is about the operations at simplex printing, yet the below explains the operations at duplex
printing. While duplex printing, the paper, which firstly passed through the fuser unit after the backside
printing, is conveyed to the inward of Duplex Unit, by the reverse operation of the second ejecting roller
that is a certain time after removing the first ejecting roller of the paper rear side. Paper, is conveyed by
conveying roller of Duplex Unit, and then merges to the same route with the feeding paper that is from
the tray. Onwards, it is the same with the simplex printing operation by the feeding paper from tray.

：
：
：
：
：
：
：
：
：
Face down stacker
Face up stacker
The 2nd ejecting roller
The 1st ejecting roller
Backup roller
Duplex unit
Ejecting
sensor lever
Resist roller
MPT feeding roller
Multipurpose tray
Conveying roller
Conveying roller
Transferring roller
Pulse motor
Paper conveying route
Driving roller (Continuous rotation)
Driving roller (Control rotation)
Driving roller
Paper level indicator lever
Indicating lever
Photo sensor
Micro switch
Magnetic clutch
Solenoid
DC motor
Heat roller
Conveying roller
Pick up roller
Pick up roller
Feeding roller
Feeding roller
Tray 1
Tray 2
2nd tray unit (option)
Entrance
sensor lever
Image drum
Writing out
sensor lever

Oki B410 Specifications

General

Print Technology	LED
Input Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual
Maximum Paper Size	A4
Operating Systems Supported	Windows, Mac OS
Power Consumption	450W (average)
Output Capacity	150 sheets