C6100 Series User’s Guide
262
Restrictions
1. Custom Page Size may not work with all software
applications.
2. Custom page sizes can only be printed from the manual
feed (multi purpose (MP) tray).
• one-sided printing only
• rear exit only.
If the sheet of paper you are using is too long to be
supported by the MP tray, use your hands.
3. Custom page sizes can only be printed to the face-up exit
(straight-through paper feed/rear exit).
4. Before using Custom Paper Size, you must change the
printer driver setting for the multi-purpose tray Paper
(Media) Size to Custom Paper Size.
5. The paper size must be set to portrait (Width is less than
Length).
6. If you use Custom Page, and are not satisfied with the
print quality, try setting the PRINT QUALITY to Normal or
Quick.
7. The number of custom page sizes that can be defined
varies according to the type of the printer driver and the
operating system.
PostScript
XP,2000, NT: One
Me/98: Three
PCL
XP, 2000, Me/98, NT: up to 32
8. Most applications allow the printer properties to be
accessed from within the document print dialog box.
Settings in your applications override settings in the
printer driver.
Settings in the printer driver override settings in the
printer menus.
To Next Page
Loading...
Need help?
General
