C6100 Series User’s Guide
87
Replace the Fuser __________________
c53_104_fuser_transport_loc.jpg
REPLACE FUSER
354: FUSER LIFE
1. Press the cover release. Fully open the printer’s top
cover.
c53_02_opencvr.jpg
WARNING!
If the printer has been powered on, the fuser is
HOT. This area is clearly labelled. Do not touch it.
Handle the fuser with extreme care. Hold it only
by its handle, which is only mildly warm to the
touch.
If in doubt, switch the printer off. Wait at least
10 minutes for the fuser to cool before opening
the printer cover.
To Next Page
Loading...
Need help?
General
