Oki ES7131 User Manual

- 23 -
About the Options
1
Setup
3 Gently place the printer on the additional
trays, inserting the projections (1) of
the additional tray into the holes on the
bottom of the printer.
CAUTION
It may cause injury!
● At least two people are needed to lift the printer
safely because it weighs about 27 Kg.
1
4 Plug the AC cable and removed cables
into your printer, and then turn on the
power switch.
Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
memory overow or the collate print errors
occur. Your printer supports 512 MB RAM.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when other products are used.
● The static electricity may cause damage to the parts.
Discharge the static electricity in your body by touching
grounded metallic parts, etc. before work.
Memo
● For banner printing, installing additional memory is
recommended.
1 Turn off your printer, and then unplug all
the cables from the printer.
Reference
● "Turning Off the Power" P.29
2 Open the access cover (1) on the right
side of a printer.
1

Oki ES7131 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	USB, Ethernet
Processor Speed	800 MHz
Duplex Printing	Automatic