Oki ES7131 User Manual

- 37 -
Paper Output
2
Printing Basic Operation
●● Paper Output
Your printer outputs to the facedown or faceup stacker. Paper types that can be output to each stacker
are as follows:
Output
Stacker
Supported
paper type
Paper output
capacity
Facedown
Output
Stacker
● Plain paper
● Recycled
paper
● 500 sheets (when
paper weight is less
than 80 g/m
2
)
Faceup
Output
Stacker
● Plain paper
● Recycled
paper
● Envelope
● Index card
● Label
● 100 sheets (when
paper weight is less
than 80 g/m
2
)
● 20 sheets (Ultra
Heavy paper and
envelopes)
Note
● Do not open or close the faceup stacker while printing as
it may result in a paper jam.
 Using the Facedown Stacker
Paper is delivered with the print side face down,
stacked in the order printed.
Note
● Check that the faceup stacker (1) on the rear side of the
printer is closed. If the faceup stacker is open, paper is
always output to the faceup stacker.
1
Memo
● Open the paper supporter (2) so that the printed papers
do not fall down from the top cover.
2
 Using the Faceup Stacker
Paper is delivered with the print side face up,
stacked opposite the order printed.
1 Pull the faceup stacker (1) on the rear
side of the printer and open it outward.
Insert your nger into the recess at the
center of the faceup stacker then open it
obliquely downward.
1
2 Unfold the paper support (2).
2
3 Pull out the sub support (3).
3

Oki ES7131 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	USB, Ethernet
Processor Speed	800 MHz
Duplex Printing	Automatic