Oki ES7131 User Manual

- 49 -
Setting the Auto Power Off Time
2
Printing Basic Operation
Setting the Time that Elapses
Before Entering the Auto
Power Off Mode
Note
● When the printer is in power saving mode, press the
<POWER SAVE> button to restore from the mode.
● Make sure that the message “Ready To Print” is displayed
in the operator panel. If the message is not displayed,
press the <ON LINE> button.
1 Press the <Fn> key on the operator
panel.
2 Enter “202” using the ten-key pad, then
press the <ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䢢䣐䣷䣯䣤䣧䣴
䢴䢲䢴
䣇䣰䣶䣧䣴䢢䢳䢯䢵䣦䣫䣩䣫䣶䢢䣐䣷䣯䣤䣧䣴
3 Press the scroll button or to specify
the time and then press the <ENTER>
button.
䣃䣷䣶䣱䢢䣒䣱䣹䣧䣴䢢䣑䣨䣨䢢䣖䢰䢰䢰 䢢 䢳䢱䢴
䢬䢢䢳䢢䣪䣱䣷䣴
䢴䢢䣪䣱䣷䣴䣵
䢶䢢䣪䣱䣷䣴䣵
䢵䢢䣪䣱䣷䣴䣵
4 Press the <ON LINE> button.
Memo
● The auto power off time can be selected from among
the options shown below. The factory default setting is 4
hours.
- [1 hour]
- [2 hours]
- [3 hours]
- [4 hours]
- [8 hours]
- [12 hours]
- [18 hours]
- [24 hours]

Oki ES7131 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	USB, Ethernet
Processor Speed	800 MHz
Duplex Printing	Automatic