Oki ES7131 User Manual

- 48 -
Setting the Auto Power Off Time
2
Printing Basic Operation
●● Setting the Auto Power Off Time
Note
● In the factory default, a printer does not enter the auto power off mode while connecting to the network.
Settings for Auto Power Off
To enable the auto power off mode while
connecting to the network, perform the following
procedure:
1 Press the scroll button on the operator
panel.
2 Press the scroll button several times
to select [Admin Setup] then press the
<ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢䢴䢱䢴
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲
䣒䣴䣫䣰䣶䢢䣕䣶䣣䣶䣫䣵䣶䣫䣥䣵
䣃䣫䣴䣒䣴䣫䣰䣶
䣏䣧䣰䣷䣵
3 Enter the administrator password, using
the ten-key pad.
The factory default password is “aaaaaa.” Press
the <ENTER> button whenever inputting one
character.
䣇䣰䣶䣧䣴䢢䣒䣣䣵䣵䣹䣱䣴䣦
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Power Setup] then press the
<ENTER> button.
䣃䣦䣯䣫䣰䢢䣕䣧䣶䣷䣲䢢䢢 䢢䢢䢢 䢵䢱䢶
䣒䣱䣹䣧䣴䢢䣕䣧䣶䣷䣲
䣑䣶䣪䣧䣴䣵䢢䣕䣧䣶䣷䣲
䣕䣧䣶䣶䣫䣰䣩䣵
䣖䣫䣯䣧䢢䣕䣧䣶䣷䣲
6 Press the scroll button several times
to select [Auto Power Off] then press
the <ENTER> button.
䣒䣱䣹䣧䣴䢢䣕䣧䣶䣷䣲䢢䢢䢢䢢䢳䢱䢳
䣕䣮䣧䣧䣲
䣃䣷䣶䣱䢢䣒䣱䣹䣧䣴䢢䣑䣨䣨
䣒䣱䣹䣧䣴䢢䣕䣣䣸䣧
7 Press the scroll button or several
times to select [Enable] then press the
<ENTER> button.
䣃䣷䣶䣱䢢䣒䣱䣹䣧䣴䢢䣑䣨䣨䢢䢢䢢䢳䢱䢳
䣃䣷䣶䣱䢢䣅䣱䣰䣨䣫䣩
䣆䣫䣵䣣䣤䣮䣧
䢬䢢
䢢䣇䣰䣣䣤䣮䣧
8 Press the <ON LINE> button.

Oki ES7131 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	USB, Ethernet
Processor Speed	800 MHz
Duplex Printing	Automatic