6-1 Operating Modes and System Menu
6-4
6-1-3 Overview of Menu Items
The following tables show the eight menu items and provide an overview of their contents.
1. Initialize Data Tab
Item Function
Page
Screen Data Area Formats project data, such as screen data. P. 6-8
Alarm/Event History Initializes alarm/event history data that has been generated during
operation.
P. 6-9
Data Log Initializes the data log data that registers changes to the contents
of an address.
P. 6-10
Operation Log Initializes operation log data, such as that for functional object
operations and screen switching.
P. 6-11
Error Log Initializes error log data that is generated by macro errors. P. 6-13
System language The language to display system menus, input keypads, error mes-
sages, etc., can be set to Japanese or English.
P. 6-14
2. PT Operation Settings Tab
Item Function
Page
Start-up Waiting Time Sets the system startup waiting time. Communications are not
performed during this specified time when the power is turned ON
or the PT is reset. The default is 0 s.
P. 6-16
Screen Saver Sets the screen saver to ON or OFF. The default setting is OFF. P. 6-16
Screen Saver Start-up
Time
Sets the amount of time after which the screen saver is started.
The default setting is 15 min.
P. 6-16
Key Press Sound Sets whether a sound will be heard when a touch switch is
pressed. The default setting is ON.
P. 6-17
Buzzer Sound Sets whether a buzzer will be heard when a command from the
host is received or an error occurs. The default setting is ERR ON.
P. 6-17
Backlight Sets the backlight brightness to one of three levels. The bright-
ness cannot be adjusted much.
The default setting is High
P. 6-18
Calendar Check Displays and sets the date and time for the internal clock. P. 6-18
Contrast (NS7 only) Adjusts the screen contrast. P. 6-19
3. Project Tab
Item Function
Page
Project Title Displays the project title. P. 6-20
Number of Labels Displays the number of corresponding labels. P. 6-20
Initial Screen Sets and displays the screen numbers first displayed after the
power is turned ON.
P. 6-20
Initial Label Sets and displays the label number shown on the screen after the
power is turned ON.
P. 6-20
Alarm/Event Recording
Method
Displays the method for recording the alarm/event histories. P. 6-20
Data Log Recording
Method
Displays the method for recording the data log. P. 6-20
Operation Log Recording
Method
Displays the method for recording the operation log. P. 6-21
Error Log Recording
Method
Displays the method for recording the error log. P. 6-21
System Memory ($SB) Displays the allocated addresses of the system bit memory ($SB). P. 6-21
System Memory ($SW) Displays the allocated address of the system word memory ($SW). P. 6-21
To Next Page
Loading...
Need help?
General
