6-2 Initializing Data
6-8
6-2 Initializing Data
The PT can be initializes for the following data and the system language can be specified. Ini-
tialize the PT whenever necessary.
• Screen data area format
• Alarm/event history initialization
• Data log initialization
• Operation log initialization
• Error log initialization
6-2-1 Screen Data Area Format
This function formats the PT screen data. Screen data must be formatted if it is corrupted and
cannot start up properly. The data recorded for the operation log, alarm history, data log, and
error log is not initialized when screen data is formatted.
Note
Before formatting screen data, check that the screen data has been backed up from the NS-
Designer.
Format the screen data by using operations from the Initialize Data Tab Page in the System
Menu, as follows:
To Next Page
Loading...
Need help?
General
