Omron NS7 Series User Manual

3-7 Installing the Video Input Unit
3-34
3-7-4 Connecting to Video Input Connectors
Use the following method to connect cameras to the Video Input Unit mounted to the PT.
Note The tensile load of the cable is 30 N maximum. Do not exceed maximum load.
● Connecting to Video Input Connectors
1. Insert the BNC socket on the camera’s video output cable into a video input connector.
2.
After inserting the BNC socket, twist it clockwise until it locks into place
Protuberance
BNC socket
Video input connectors
Insert the BNC socket so that
the groove is aligned with the
protuberance.
Twist clockwise.

Omron NS7 Series Specifications

General

Brand	Omron
Model	NS7 Series
Category	Touch terminals
Language	English