Omron SYSMAC CS1W-SCB41-V1 User Manual

179
Using Protocol Macros Section 5-4
Network Communications Flags
The following table shows the Auxiliary Area flags that are used when the
PMCR(260) instruction is executed.
Communications Port
Enabled Flags
These flags turn ON when execution of the PMCR(260) instruction is enabled.
Depending on the PMCR(260) instruction, they turn OFF at execution, and
turn ON when the port enters an enabled status.
Communications Port
Error Flags
These flags turn ON in the following cases:
• When an error occurs while the PMCR(260) instruction is being executed
• When an error response corresponding to each communications port
occurs, or a resend error occurs
When operations start or when the PMCR(260) instruction is executed, if the
Communications Port Enabled Flag turns OFF, then the corresponding Error
Flag also turns OFF.
Communications Port
Completion Codes
The response codes (FINS completion codes) are set when the PMCR(260)
instruction is executed. The contents of these words are also cleared when
the Communications Port Enabled Flag turns OFF at the start of operations or
when the PMCR(260) instruction is executed.
Note Refer to 11-3-5 Protocol Macros for information on completion codes.
Word Bit Contents
A202 08 to 15 Reserved
07 Communications Port No. 7 Enabled Flag
06 Communications Port No. 6 Enabled Flag
05 Communications Port No. 5 Enabled Flag
04 Communications Port No. 4 Enabled Flag
03 Communications Port No. 3 Enabled Flag
02 Communications Port No. 2 Enabled Flag
01 Communications Port No. 1 Enabled Flag
00 Communications Port No. 0 Enabled Flag
Word Bit Contents
A219 08 to 15 Reserved
07 Communications Port No. 7 Error Flag
06 Communications Port No. 6 Error Flag
05 Communications Port No. 5 Error Flag
04 Communications Port No. 4 Error Flag
03 Communications Port No. 3 Error Flag
02 Communications Port No. 2 Error Flag
01 Communications Port No. 1 Error Flag
00 Communications Port No. 0 Error Flag
Word Contents
A203 Communications Port No. 0 Completion Code
A204 Communications Port No. 1 Completion Code
A205 Communications Port No. 2 Completion Code
A206 Communications Port No. 3 Completion Code
A207 Communications Port No. 4 Completion Code
A208 Communications Port No. 5 Completion Code
A209 Communications Port No. 6 Completion Code
A210 Communications Port No. 7 Completion Code
A211 to A218 Reserved

Omron SYSMAC CS1W-SCB41-V1 Specifications

General

Brand	Omron
Model	SYSMAC CS1W-SCB41-V1
Category	Network Hardware
Language	English