111
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Firmware Update
Updating Function on This Unit
This unit has a function to update the rmware (system software) via network
or USB port. This function can improve various operations and add various
functions.
• For the latest information on updates, visit the Onkyo website. If there is no
update available, updating the rmware of this unit is not necessary.
• Before updating, make sure that the speaker setup microphone is not
connected.
• While updating the rmware, do not do the following:
– Disconnecting and reconnecting cables, USB storage device, speaker
setup microphone or headphones, or performing operations on the unit
such as turning the power o
– Accessing this unit from a PC or smartphone using their applications
• The update may take approx. 20 minutes to complete via network or via USB
port. Existing settings are guaranteed in either updating method.
When this unit is connected to the network, notications of rmware updates may
be displayed. To update the rmware, select "Update Now" with the cursors on
the remote controller, and press the ENTER button. The unit automatically enters
standby mode after "Completed!" is displayed, and the update is completed.
Disclaimer: The program and accompanying online documentation are furnished
to you for use at your own risk.
Onkyo will not be liable and you will have no remedy for damages for any claim
of any kind whatsoever concerning your use of the program or the accompanying
online documentation, regardless of legal theory, and whether arising in tort or
contract.
In no event will Onkyo be liable to you or any third party for any special, indirect,
incidental, or consequential damages of any kind, including, but not limited to,
compensation, reimbursement or damages on account of the loss of present or
prospective prots, loss of data, or for any other reason whatsoever.
❏ Updating the Firmware via Network ( p112)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
