EasyManuals Logo

Onkyo TX-NR686 User Manual

Onkyo TX-NR686
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
127
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
USB storage device
USB storage device is not displayed
Check if the USB storage device or USB cable is securely inserted to the USB port of the unit.
Disconnect the USB storage device once from the unit, and then reconnect it.
Performance of the hard disk that receive power from the USB port of the unit is not guaranteed.
Depending on the type of content, the playback may not be performed normally. Check the types of supported le formats.
Operations of USB storage devices equipped with security functions are not guaranteed.
( p50)
Wireless LAN Network
Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the
wireless LAN router.
Check the following if the problem persists after you have conrmed the above.
Cannot access wireless LAN network
The wireless LAN router setting may be switched to Manual. Restore the setting to Auto.
Try the manual set-up. The connection may succeed.
When the wireless LAN router is in stealth mode (mode to hide SSID) or when the ANY connection is o󰀨, the SSID is not displayed. Change the
setting and try again.
Check if the SSID and encryption settings (WEP, etc.) are correct. Match the network settings with the settings of this unit.
Connection to an SSID that includes multi-byte characters is not supported. Set the SSID of the wireless LAN router using single-byte
alphanumeric characters only, and try again.
Connected to an SSID di󰀨erent from the selected SSID
Some wireless LAN routers allow you to set multiple SSIDs for one unit. If connecting to such a router using the automatic setting button, you may
end up connecting to an SSID di󰀨erent from the SSID you want to connect to. If this occurs, use the connection method requiring you to enter a
password

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-NR686 and is the answer not in the manual?

Onkyo TX-NR686 Specifications

General IconGeneral
Receiver typeSurround
Audio output channels7.2 channels
Total Harmonic Distortion (THD)1 %
Power output per channel (1KHz@6 Ohm)165 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in7
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
Line-outYes
Connectivity technologyWireless
Speakers connectivity type-
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
AM band range522 - 1710 kHz
FM band range57.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity40
Optical drive includedNo
Supported video modes2160p
Supported graphics resolutions3840 x 2160
HDCP version2.2
Product colorSilver
Audio decodersDTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital 5.1, Dolby TrueHD
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.15 W
Power consumption (typical)570 W
Package weight12500 g
Package depth450 mm
Package width539 mm
Package height260 mm
Weight and Dimensions IconWeight and Dimensions
Depth379.5 mm
Width435 mm
Height173.5 mm
Weight10000 g

Related product manuals