- 106 -- 106 -
5. Recording settings - Main Assist Functions
●
When the following functions are being used, [E-Stabilization (Video)] is not available:
– 6K video/5.9K video/5.4K video
– [Variable Frame Rate]
– [HDMI RAW Data Output]
– [Live Cropping]
[SS/Gain Operation]
You can switch the units of shutter speed values and gain (sensitivity) values.
[MENU/SET]
[ ] [ ] Select [SS/Gain Operation]
[SEC/ISO] Displays the shutter speed in seconds and the gain in ISO.
[ANGLE/ISO]
Displays the shutter speed in degrees and the gain in ISO.
●
The angle can be set in a range between 11° and 358°. (When [Synchro Scan] is set to
[OFF])
[SEC/dB]
Displays the shutter speed in seconds and the gain in dB.
●
0 dB corresponds to either of the following ISO sensitivity values.
– When [Dual Native Gain Setting] is set to [AUTO] or [LOW]: [100]
– When [Dual Native Gain Setting] is set to [HIGH]: [640]
●
When [SS/Gain Operation] is set to [SEC/dB], menu names change as shown below:
– [Dual Native ISO Setting]
[Dual Native Gain Setting]
– [ISO Sensitivity (video)]
[Gain Setting]
– [ISO Auto Lower Limit Setting]
[Auto Gain Lower Limit Setting]
– [ISO Auto Upper Limit Setting]
[Auto Gain Upper Limit Setting]
– [Extended ISO]
[Extended Gain Setting]
Setting Range for Gain (Sensitivity)
When [SS/Gain Operation] is set to [SEC/dB], gain (sensitivity) can be set in the following ranges.
[Dual Native Gain Setting] [Extended Gain Setting] Setting Range for Gain (Sensitivity)
[AUTO]
[OFF] [AUTO], [0 dB] to [54 dB]
[ON] [AUTO], [–6 dB] to [66 dB]
[LOW]
[OFF] [AUTO], [0 dB] to [18 dB]
[ON] [AUTO], [–6 dB] to [18 dB]
[HIGH]
[OFF] [AUTO], [0 dB] to [38 dB]
[ON] [AUTO], [–6 dB] to [50 dB]