Panasonic Lumix DC-BS1H User Manual

- 65 -- 65 -
4. Recording Videos - Time Code
Synchronize the Time Code of the Camera with That of the External
Device (TC IN)
The initial time code value of the camera is synchronized according to the time code signal of the external device.
●
In advance, change the [System Frequency] ( 50 / [System Frequency]), [Rec Quality] ( 51 / [Rec Quality]), and
[Time Code Mode] (
62 / [Time Code Mode]) to match the external device.
1 Prepare for time code synchronizing. ( 63 / Preparations for Time Code
Synchronization)
2 Set [TC Synchronization] to [TC IN].
●
[MENU/SET] [ ] [ ] [Time Code] [External TC Setting] [TC Synchronization] [TC IN]
3 Operate the external device to output the time code signal.
●
Set the time code count method of the external device to free run, and output the signal.
● When synchronized with the time code of an external device, this camera is in a slave state, and the [ ] of the time
code shown on the screen switches to [
].
Maintaining, Releasing, and Restoring the Slave State
Even if you disconnect the BNC cable, the camera will remain in slave state.
●
Perform one of the following operations to release the camera from the slave state.
– Operate the camera ON/OFF button
– Switch the recording mode
– Change the [System Frequency]
– Set the [Variable Frame Rate]
– Switch the [Rec Quality] between 47.95p/23.98p and a different recording frame rate
– Change the following [Time Code] setting items
[Count Up], [Time Code Value], [Time Code Mode], [TC Synchronization]
●
To restore the slave state, reconnect the BNC cable to the external device while set as follows.
The time code signal can be input just by connecting.
– [Count Up] ([Time Code]): [FREE RUN]
– [TC Synchronization] ([External TC Setting] in [Time Code]): [TC IN]
●
Even when the system frequency differs between the camera and the external device, their initial time code values may
be synchronized. Bear in mind, however, that the time codes lose sync as they count up.

Panasonic Lumix DC-BS1H Specifications

General

Megapixel	24.2 MP
Camera type	MILC Body
Sensor type	CMOS
Sensor format	Full-frame
Image stabilizer	No
Total megapixels	25.28 MP
Image sensor size	- \
Image formats supported	JPEG
Supported aspect ratios	3:2
Maximum image resolution	6000 x 4000 pixels
Image sensor size (W x H)	35.6 x 23.8 mm
Still image resolution(s)	6000x4000, 4272x2848, 3024x2016, 3888x2592, 2784x1856, 1968x1312
Scene modes	-
White balance	Auto, Cloudy, Custom modes, Incandescent, Manual, Shade
Self-timer delay	- s
Tripod mounting supported	Yes
Product color	Black
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Quantity per pack	1 pc(s)
Battery voltage	- V
Number of batteries supported	1
Light metering	Centre-weighted, Evaluative (Multi-pattern), Highlight-weighted, Spot
ISO sensitivity	50, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 102400, 204800
Light exposure modes	Aperture priority AE, Auto, Manual, Shutter priority AE
ISO sensitivity (max)	204800
ISO sensitivity (min)	50
Light exposure control	Program AE
Light exposure correction	± 5EV (1/2EV; 1/3EV step)
Number of measurement zones	1728
Fastest camera shutter speed	1/8000 s
Slowest camera shutter speed	1 s
HD type	6K Ultra HD
Video formats supported	MOV, MP4
Maximum video resolution	5952 x 3968 pixels
Audio system	stereo
Compatible memory cards	SD, SDHC, SDXC
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector	USB Type-C
HDMI connector type	Full-size
Headphone connectivity	3.5 mm
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2

Weight and Dimensions

Depth	78.8 mm
Width	93 mm
Weight	585 g