Panasonic Lumix DC-BS1H User Manual

- 269 -- 269 -
14. Materials - Troubleshooting
Recording
Cannot record videos.
●
When using a large capacity card, you may not be able to record for a while after turning on the camera.
Recording stops before finishing. Cannot use some functions.
●
Recording video requires a card of a supported Speed Class. Use a compatible card. ( 10 / Memory Cards That Can Be
Used)
●
In high ambient temperatures or if the camera is used for continuous recording, the temperature of the camera will rise. To
protect the camera against a rise in temperature, after [
] is displayed, recording will be stopped. Wait until the camera
cools down.
The recorded image is whitish.
●
Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar. If the lens is dirty, turn the
camera off, then wipe the lens surface with a soft, dry cloth. For information about how to clean the image sensor. (
274 /
Dirt on the image sensor)
The recorded image is too bright or dark.
●
Ensure AE Lock is not set where it is not appropriate. ( 85 / Locking Focus and Exposure (AF/AE Lock))
The subject is not focused properly.
●
Confirm the following details:
– Is the subject outside of the focus range?
– Is AF Lock (
85 / Locking Focus and Exposure (AF/AE Lock)) set where it is not appropriate?
Focusing cannot be done with the lens.
●
Confirm the following details:
– Is the “Lens” of [Lock Switch Setting] set to [
]? ( 195 / [Lock Switch Setting])
– Is the [Focus Ring Lock] set to [ON]? (
194 / [Focus Ring Lock])
The recorded image looks rough. Noise appears on the picture.
●
Try the following:
– Reduce the ISO sensitivity. (
86 / ISO Sensitivity)
– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to
the negative direction. (
95 / Adjusting Image Quality)
The subject appears distorted on the image.
●
When a moving subject is recorded, the subject may appear distorted in the picture.
This is a characteristic of the CMOS sensor that is the image sensor of the camera, and is not a malfunction.

Panasonic Lumix DC-BS1H Specifications

General

Megapixel	24.2 MP
Camera type	MILC Body
Sensor type	CMOS
Sensor format	Full-frame
Image stabilizer	No
Total megapixels	25.28 MP
Image sensor size	- \
Image formats supported	JPEG
Supported aspect ratios	3:2
Maximum image resolution	6000 x 4000 pixels
Image sensor size (W x H)	35.6 x 23.8 mm
Still image resolution(s)	6000x4000, 4272x2848, 3024x2016, 3888x2592, 2784x1856, 1968x1312
Scene modes	-
White balance	Auto, Cloudy, Custom modes, Incandescent, Manual, Shade
Self-timer delay	- s
Tripod mounting supported	Yes
Product color	Black
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Quantity per pack	1 pc(s)
Battery voltage	- V
Number of batteries supported	1
Light metering	Centre-weighted, Evaluative (Multi-pattern), Highlight-weighted, Spot
ISO sensitivity	50, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 102400, 204800
Light exposure modes	Aperture priority AE, Auto, Manual, Shutter priority AE
ISO sensitivity (max)	204800
ISO sensitivity (min)	50
Light exposure control	Program AE
Light exposure correction	± 5EV (1/2EV; 1/3EV step)
Number of measurement zones	1728
Fastest camera shutter speed	1/8000 s
Slowest camera shutter speed	1 s
HD type	6K Ultra HD
Video formats supported	MOV, MP4
Maximum video resolution	5952 x 3968 pixels
Audio system	stereo
Compatible memory cards	SD, SDHC, SDXC
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector	USB Type-C
HDMI connector type	Full-size
Headphone connectivity	3.5 mm
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2

Weight and Dimensions

Depth	78.8 mm
Width	93 mm
Weight	585 g