- 238 -- 238 -
12. Remote Operations - Operating the Camera with a Smartphone
[Location Logging]
The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the
acquired location information.
Preparation:
●
Enable the GPS function on the smartphone.
1 Enable [Location Logging] on the camera.
●
[MENU/SET] [ ] [ ] [Bluetooth] [Location Logging] [ON]
●
The camera will enter a mode where location information can be recorded and [ ] is displayed in the recording
screen.
2 Record images with the camera.
●
Location information will be written to the recorded images.
●
When [ ] on the recording screen appears translucent, location information cannot be acquired, therefore data
cannot be written. Smartphone GPS positioning may not be possible if the smartphone is within a building, a bag,
or something similar. Move the smartphone to a position affording a wide view of the sky to improve positioning
performance. Also refer to the operating instructions of your smartphone.
●
Images with location information are indicated with [ ].
●
Be sure to pay special attention to the privacy, and portrait rights, etc. of the subject when you use this function. Use at
your own risk.
●
The smartphone drains its battery faster while acquiring location information.
●
[Location Logging] is not available when connected with a LAN cable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
