- 201 -- 201 -
11. Menu Guide - [Custom] menu
[Custom] menu ([Lens / Others])
: Default settings
[Lens Focus Resume]
[ON] / [OFF]
The camera saves the focus position when you turn it off.
[Lens Fn Button Setting]
[Focus Stop] / [AF Mode] / [Focus Ring Lock] / [AE LOCK] / [AF LOCK] / [AF/AE LOCK] / [AF-ON] / [AF-ON : Near Shift] /
[AF-ON : Far Shift] / [Focus Area Set] / [Image Stabilizer] / [No Setting] / [Off (Disable Press and Hold)] / [Restore to Default]
Sets the function to be assigned to the focus button of an interchangeable lens.
●
You can call up the assigned function by setting the focus selector switch of a compatible interchangeable lens to [Fn]
and then pressing the focus button of the lens.
●
When [Focus Stop] is used, the focus is locked while the focus button is pressed and held.
●
When using an interchangeable lens that has a switch for the image stabilizer (normal/panning), [Image Stabilizer] in
[Lens Fn Button Setting] is not available.
[Focus Ring Control]
[NON-LINEAR] / [LINEAR]
[SET]
[90°] to [1080°] (
[300°]) / [Maximum]
Sets the amount of movement for focusing using the focus ring. (When using supported lenses)
[NON-LINEAR]: Focus responds by accelerating according to rotation speed of the focus ring.
[LINEAR]: Focus responds at a constant amount according to the rotational angle of the focus ring. When using lenses
equipped with focus clutch mechanisms, set the lens to AF and the camera to MF.
[SET]: Sets the rotational angle of the focus ring for when [LINEAR] is selected. (Angles that cannot be set with the attached
lens are not displayed.)
[Vertical Position Info (Video)]
[ON] / [OFF]
You can set on the menu, whether or not to record the camera’s vertical orientation information during video recording.
[ON]: Records vertical orientation information. Videos recorded with the camera held vertically (Fan outlet or inlet pointed
downwards) will be automatically played vertically on the PC or smartphone etc. during playback.
[OFF]: Does not record vertical orientation information.