- 16 -- 16 -
2. Getting Started - Power supply
2. Getting Started
Power supply
You can supply power to the camera using an AC adaptor (supplied), a PoE+*
1
compatible switching hub or PoE+ compatible
injector (commercially available), and a battery pack (optional)*
2
.
*
1
PoE+ is an abbreviation of Power Over Ethernet Plus.
*
2
This will be referred to as “battery pack” or “battery” onwards.
●
When several power supplies are connected at the same time, it will be prioritized in the order of AC adaptor, PoE+
power supply and then battery.
●
The battery that can be used with the camera is AG-VBR59/AG-VBR89/AG-VBR118. (As of October 2021)
– Always use genuine Panasonic batteries (AG-VBR59, AG-VBR89, AG-VBR118).
– If you use other batteries, we cannot guarantee the quality of this product.
Supplying power with an AC adaptor
Connect the supplied AC adaptor and AC cable/AC mains lead to the camera to supply power (power supply).
B
AC adaptor (supplied)
AC cable/AC mains lead (supplied)
1 Connect the AC adaptor to the [DC IN 12 V] terminal of the camera.
2 Connect the AC cable/AC mains lead to the AC adaptor, then plug it into the power
outlet.
●
The AC cable/AC mains lead is for this camera only, so do not use it with other devices. Additionally, do not use the AC
cable/AC mains lead of other devices with this camera.