- 143 -- 143 -
7. Output image - SDI output settings
[System Frequency]: [24.00Hz (CINEMA)]
[SDI Output Resolution]
Recording frame rate of the [Rec Quality]
48.00p
24.00p
1080p —
1080i —
1080PsF 1080/24.00PsF
720p —
●
This memorizes the setting value for each recording frame rate of [Rec Quality].
●
When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [1080PsF].
●
When set to a recording quality for high frame rate video, the frame rate is down-converted for output.
Output control information to the external recorder
Outputs record starting and stopping control information to the external recorder connected with SDI.
[MENU/SET]
[ ] [ ] [SDI Rec Output] Select [SDI Recording Control]
Settings: [ON] / [OFF]
●
It can be set when [SDI Time Code Output] is [ON].
●
Control information is output when pressing the video rec. button, even if the video cannot be recorded (such as when
there is no card inserted into the camera).
●
Only compatible external devices can be controlled.
Output audio via SDI
Outputs audio to external devices connected via SDI.
[MENU/SET]
[ ] [ ] [SDI Rec Output] Select [Sound Output (SDI)]
Settings: [ON] / [OFF]
●
High resolution audio cannot be output when output via SDI. When [Sound Output (SDI)] is set to [ON], [96kHz/24bit] of
[XLR Mic Adaptor Setting] cannot be used.
Set the gain of the audio signal that is output via SDI
Sets the audio signal’s gain that is output to the SDI connected external device.
[MENU/SET]
[ ] [ ] [SDI Rec Output] Select [SDI Sound Output Gain Adj.]
Settings: [0dB] / [-6dB] / [-8dB]