- 265 -- 265 -
14. Materials - Message Displays
Message Displays
Meanings of main messages and response methods.
Card
[Memory Card Error] / [Format this card?]
●
It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before
formatting. (
27 / Formatting Cards (Initialization))
[Memory Card Error] / [This memory card cannot be used]
●
Use a card compatible with the camera. ( 10 / Memory Cards That Can Be Used)
[Insert memory card again.] / [Try another card]
●
Unable to access the card. Reinsert the card.
●
Insert a different card.
[Read Error] / [Write Error] / [Please check the card]
●
Failure to read or write data. Turn off the camera, reinsert the card, and then turn it on again.
●
The card may be broken.
●
Insert a different card.
[Recording was cancelled due to the limitation of the writing speed of the card]
●
Insufficient card write speed. Use a card of a supported Speed Class. ( 10 / Memory Cards That Can Be Used)
●
If the recording stops even when you are using a card that meets the specified Speed Class rating, the data writing speed of
the card is getting slow. We recommend backing up data, and formatting. (
27 / Formatting Cards (Initialization))
Lens
[The lens is not attached properly. Do not push lens release button while lens is attached.]
●
Remove the lens once, and then attach it again without pressing the lens release button. ( 20 / Attaching a Lens)
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached correctly.]
●
Remove the lens from the camera body and gently wipe the contacts on the lens and the camera body using a dry cotton
swab. Attach the lens, turn on the camera again, and if it is still displaying, contact the dealer.