- 114 -- 114 -
6. Special Video Recording - [Focus Transition]
[Focus Transition]
Smoothly transitions the focus position from the current position to a position registered in advance.
1 Select [Focus Transition].
●
[MENU/SET] [ ] [ ] [Focus Transition]
2 Set the recording settings.
[Start] Start recording.
[Focus Pull Setting]
Registers the focus position.
●
The setting screen for the focus position is displayed when you select either
[1], [2], or [3]. Use the same procedure as MF (
79 / Record Using MF) to
check the focus, then press [MENU/SET] to register the focus position.
[Focus Transition Speed]
Sets the moving speed of focus.
●
Moving speed: [SH] (fast) to [SL] (slow)
[Focus Transition Rec]
Starts Focus Transition when recording starts.
●
Select the position registered with [Focus Pull Setting].
[Focus Transition Wait] Sets the wait time before the start of Focus Transition.
3 Close the menu.
●
Selects [Start], and press [MENU/SET].
● The recording screen is displayed.
●
To return to the setting screen, press [Fn1].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
