6. Shutter and Drive Settings
182
1 Select [ ] ([4K Burst(S/S)]). (P178)
A Available recording time
2 Press the shutter button fully.
•
Recording will start.
• If you are using Auto Focus, [Continuous AF] will work
during recording. Focus will be adjusted continuously.
3 Press the shutter button fully again.
•
Recording will stop.
• When [Auto Review] is enabled, the picture selection
screen will be displayed automatically. To continue recording, press the shutter button
halfway to display the recording screen.
• For information on how to select and save pictures from recorded 4K burst files, refer to P185.
• When the ambient temperature is high or continuous [ ] ([4K Burst(S/S)]) recording is
performed, the camera may display [ ] and stop the recording to protect itself. Wait until the
camera cools down.
• Recording will continue without interruption even when the file size exceeds 4 GB, but the file
will be divided and saved/played back separately.
Recording with [4K Burst(S/S)]
Recording tips
Adding markers to select and save pictures
You can add markers if you press [Fn1] during
recording. (Up to 40 markers per recording) When
selecting and saving
pictures from a 4K burst file,
you can skip to the positions where you added
markers.
B Function button [Fn1]
60
p
AFS
4K
4:3
0
04
5
5m04s
To Next Page
Loading...
Need help?
General
